|
HOT TIPS Using Silicone Sealants
| • |
Use only Neutral Cure, Alcohol Free, Low Modulus Sealant (Silicone). |
| • |
Deks Industries have trailed OCI N-192 Silicone Sealant and found it to provide a satisfactory seal between the EPDM and most commonly used roofing materials. |
| • |
The base of the Dektite should be moulded by hand to form a snug fit to the roof profile.
The Dektite should then be lifted clear and a continuous bead of silicone applied to the whole of the ribbed underside of the Dektite. For an effective seal a 1 – 3mm bead of silicone is sandwiched between the two surfaces.
Pull the Dektite down to sit snugly on the roof profile and fasten with washered screws / Hex screws. NB: Screw coatings of class 4 or 5 are required.
Remove excess silicon and collect any swarf. |
Surface Preparation
| • |
All surfaces must be clean, dry, sound, and free from dust, oil, rust or any other contamination. |
| • |
Metals and glass should be cleaned with a non-oily solvent such as metholated spirits. |
| • |
Solvent should be wiped from the surface with a clean dry cloth. |
| • |
For plastics, contact the manufacturer for a recommended cleaning solvent. |
| • |
When used on remedial work all existing sealant must be removed. |
Tile Flashing
| • |
In flue applications, apply a liberal coating of sealant over worm drive mechanism.
|
|